x1 a2 a1 a3 x2 + x1 a2 a1 a3 x2 + x1 a2 a1 a3 x2 + xc xb 14 to-5 high-performance relays tyco electronics corporation www.tycoelectronics.com 800-522-6752 (u.s.a.) or 717-564-0100 specifications subject to chan ge. cii and tyco are trademarks. ?003 by tyco electronics corporation 1msdd sensitive to-5 diode suppressed/protected high-performance relay qualified to mil-r-39016/26 features suppression & protection diodes hermetically sealed high shock & vibration ratings spreader pad excellent rf switching 1ms sensitive to-5 high-performance relay qualified to mil-r-39016/10 features hermetically sealed high shock & vibration ratings spreader pad excellent rf switching 1msd sensitive to-5 diode suppressed high-performance relay qualified to mil-r-39016/25 features suppression diode hermetically sealed high shock & vibration ratings spreader pad excellent rf switching 1mst sensitive to-5 diode suppressed/transistor dri- ven high-performance relay qualified to mil-r-28776/4 features transistor driver & suppression diode hermetically sealed high shock & vibration ratings spreader pad excellent rf switching electrical characteristics contact arrangement 1 form c (spdt) contact material stationary: gold/platinum/palladium/silver alloy (gold plated) moveable: gold/platinum/palladium/silver alloy (gold plated) contact resistance before life: 100 milliohms max. (measured @ 10 ma @ 6 vdc) after life: 200 milliohms max. (measured @ 1 a @ 28 vdc) mechanical life expectancy 1 million operations coil voltage 5 to 40 vdc coil power 506 mw max. @ 25? duty cycle continuous pick-up voltage approximately 50% of nominal coil voltage pick-up sensitivity 40 mw max. @ 25? 1ms/1msd/1msdd/1mst enclosure 1mst header 1ms/1msd/1msdd header contact ratings contact type operations load min. 1.0 a @ 28 vdc resistive 100,000 250 ma @ 115 vac, 60 hz & 400 hz resistive (case not grounded) 100,000 100 ma @ 115 vac, 60 hz & 400 hz resistive 100,000 0.2 a @ 28 vdc inductive (0.32 henry) 100,000 0.1 a @ 28 vdc lamp 100,000 30 ma @ 50 mvdc low level 1,000,000 0.1 a @ 28 vdc intermediate current 50,000 1ms 1msd 1msdd 1mst .375 (9.53) max .335 (8.51) dia max .370 (9.40) dia max .017 (0.43) dia +.002 -.001 pin configuration will vary with relay type .370 (9.40) dia max .031 .003 (0.79) 45 3 .200 (5.08) dia .035 .010 (0.89) .370 (9.40) dia max .031 .003 (0.79) 36 3 .035 .010 (0.89) .200 (5.08) dia terminal view terminal view terminal view terminal view terminals w 1.500 min (38.1) c .500 min (12.7) p .187?010 (4.75?25) (length excludes spreader pad) x1 a2 a1 a3 x2
15 to-5 high-performance relays tyco electronics corporation www.tycoelectronics.com 800-522-6752 (u.s.a.) or 717-564-0100 specifications subject to chan ge. cii and tyco are trademarks. ?003 by tyco electronics corporation operating characteristics timing operate time: 4.0 ms max. 1mst: 3.5 ms max. (transistor driven) release time: 1ms: 2.5 ms max. 1msd/1msdd: 7.5 ms max. (suppression diode, suppression/steering diodes) 1mst: 7.5 ms max . (transistor driven) contact bounce 1.5 ms max dielectric withstanding voltage between open contacts: 500 vrms 60 hz between adjacent contacts: 500 vrms 60 hz between contacts & coil: 500 vrms 60 hz insulation resistance 10,000 megohms @ 500 vdc 1,000 megohms @ 500 vdc (coil to case @ +125?) environmental characteristics temperature range -65? to +125? weight 0.10 oz. (2.84 grms) 0.11 oz. (3.09 grms) with spreader pad attached vibration resistance 30 g s, 10 to 3,000 hz shock resistance 75 g s, 6 ? ms max. qpl approval mil-r-39016/10 (j1ms) mil-r-39016/25 (j1msd) mil-r-39016/26 (j1msdd) mil-r-28776/4 (j1mst) semiconductor characteristics diode 100 vdc peak inverse voltage (piv) 1.0 vdc max. transient voltage transistor 0.3 vdc min. base turn off voltage 6.0 vdc min. emitter-base breakdown voltage (bv ebo ) @ 25? 80.0vdc min. collector-base breakdown voltage (bv cbo ) @ 25? & i c =100 ma coil data nom. coil coil circuit coil circuit pickup base turn pickup base turn drop-out drop-out nom. coil max. coil coil resistance current current voltage on current voltage on current voltage voltage power coil desig. voltage in ohms ma (max.) ma (min.) vdc (max.) ma (max.) vdc (max.) ma (max.) vdc (min.) vdc (min.) (mw) voltage (vdc) ?0% @ 25? @ 25? @ 25? @ 125? @ 125? @ 25? @ -65? @ 25? (note 1) (note 1&2) (note 1&2) (note 2) (note 2) (note 2) (note 2) 1ms/1msd 5.0 125 n/a n/a 2.8 n/a 3.7 n/a 0.23 0.15 200 8.0 5 6.0 255 n/a n/a 3.5 n/a 4.5 n/a 0.28 0.18 141 11.0 6 9.0 630 n/a n/a 5.3 n/a 6.8 n/a 0.54 0.35 129 12.0 9 12.0 1,025 n/a n/a 7.0 n/a 9.0 n/a 0.63 0.40 140 22.0 12 18.0 2,300 n/a n/a 10.5 n/a 13.5 n/a 0.91 0.59 141 24.0 18 26.5 4,000 n/a n/a 14.2 n/a 18.0 n/a 1.37 0.89 176 45.0 26 32.0 6,500 n/a n/a 18.7 n/a 24.0 n/a 1.59 1.0 158 57.0 32 40.0 11,000 n/a n/a 23.3 n/a 30.0 n/a 2.0 1.3 145 75.0 40 1msdd 5.0 100 50.0 36.3 3.5 n/a 4.5 n/a 0.23 0.15 250 8.0 5 6.0 200 30.6 22.7 4.1 n/a 5.5 n/a 0.28 0.18 180 11.0 6 9.0 630 15.0 11.5 6.3 n/a 7.8 n/a 0.54 0.35 129 16.0 9 12.0 1,025 12.5 9.7 8.0 n/a 10.0 n/a 0.63 0.40 140 22.0 12 18.0 2,300 8.5 6.7 11.6 n/a 14.5 n/a 0.91 0.58 141 33.0 18 26.5 4,000 7.2 5.7 15.4 n/a 19.0 n/a 1.37 0.89 176 45.0 26 32.0 6,500 5.4 4.3 17.0 n/a 21.0 n/a 1.5 0.95 158 57.0 32 40.0 11,000 4.0 3.2 22.0 n/a 27.0 n/a 2.0 1.28 145 75.0 40 1mst 5.0 125 47.8 34.7 2.6 0.28 3.6 1.20 0.22 0.15 200 8.0 5 6.0 255 27.7 21.2 3.5 0.20 4.8 0.78 0.28 0.18 141 11.0 6 9.0 630 16.8 11.8 5.4 0.13 7.8 0.48 0.54 0.35 129 16.0 9 12.0 1,025 13.6 10.1 6.6 0.10 10.0 0.39 0.63 0.41 140 22.0 12 18.0 2,300 9.1 6.7 9.8 0.07 14.5 0.26 0.91 0.58 141 33.0 18 26.5 4,000 7.7 5.7 12.8 0.05 19.0 0.20 1.37 0.89 176 45.0 26 32.0 6,500 5.8 4.2 18.7 0.04 24.0 0.16 1.60 1.00 158 57.0 32 40.0 11,000 4.3 3.1 23.3 0.03 30.0 0.13 2.10 1.30 145 75.0 40 note 1: coil resistance not directly measurable. coil current should be within limits shown when tested at nominal voltage at 2 5? for 5 seconds max. note 2: set base current at 3 ma to 15 ma during measurements. spreader & mounting pads diodes specifying a part number example : type terminals transistor coil spreader / mounting p ads 1 ms c d -26 s .370 (9.40) sq max .100 (2.54) .100 (2.54) .103 (2.62) 0.47 (1.19) dia .014 .003 (0.36) .140 ?.175 dia (3.56 ?4.45) s w
|
